Currency
Language
Select the language to display the site in:
Top Sellers
Featured Products
| Magic Sculpt |
|
2 Part - Expoxy and Resin. Perfect for all aspects of taxidermy work. Color - Natural. Available in 3 sizes.
Price: CAN$16.75 |
|
| Apoxie Sculpt |
|
A 2 part epoxy modeling compound that mixes in equal parts to a soft workable putty that smooths with water. It dries hard, will not shrink or crack and accepts all paints. It won't harden in its container (until the 2 parts are mixed), is user friendly with no harsh chemicals, is virtually odorless, and has an unlimited shelf life if stored frozen. Excellent for finishing open mouths, eyes and nostrils or for repairs such as reconstructing broken antlers. Natural color only. Available in 2 sizes.
Price: CAN$17.95 |
|
| VACATION |
|
We will be on vacation from september 24 to october 1st, 2010.
Price: CAN$0.00 |
|
| Tanner's Sawdust (Grade M1) |
|
A specifically selected , kiln dried hardwood sawdust for the finishing of mammal and bird skins. Highest quality in the commercial tanning industry. Grade M1 sawdust dries, conditions and polishes furs and feathers in the final stages of the tanning process. A must for a complete quality tan. Available in a 5lb. or 25lb. bag.
NOUVEAU PRIX!
NEW PRICE!
Price: CAN$9.95 |
|
Information
|
|
|
 |
'Mann' Ease Release 200
An excellent release agent for easy removal of casts from both silicone and urethane rubber molds. Manufactured for Smooth-On products by Mann Release Technologies,Inc. 14 fluid oz. (Net wt.12oz / 341grams) aerosol spray can.
|
| | Product Code: SO-E200 |
|
| Stock :Yes |
|
CAN$19.95
|
|
|
|
|
|
|
|
|
|
|
Add to Wish List
|
|
|
An excellent release agent for easy removal of casts from both silicone and urethane rubber molds. Manufactured for Smooth-On products by Mann Release Technologies,Inc.
Ease Release 200 is a general purpose mold release that will release urethane, epoxy and polyester resins from a variety of surfaces.
*Gives a satin finish to cast parts
*Useful temperature range (60ºF -500°F) (15°C-260°C)
*If compatability is in question,conduct a small scale test before using on critical parts, patterns, models or molds.
|
|
|
|
